Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Your Car's Number Plate

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this video, see how to replace the number plate on a Peugeot Partner, but know that the procedure is generally the same for all vehicles. As shown in the video, open the screw covers with a small flat screwdriver and unscrew the screw inside with a cross-head screwdriver.

Do the same on both sides. Simple, right? You might think you're done! If your new number plate holder doesn't have holes in the same position, just drill two holes of the same size as the screws, and you're good to go. As you can see, this is a very simple operation.

Good luck!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Replacing the Number Plate Light on the Peugeot Partner Tepee
Replacing the Number Plate Light on the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, you will learn how to remove and replace the number plate light on the Peugeot Partner Tepee, as well as on the Citroen Berli…
How to Change the Number Plate Bulb in the Peugeot Partner?
How to Change the Number Plate Bulb in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The number plate bulb holders in the Peugeot Partner are located at the bottom of the rear tailgate. Replacing these bulbs requires the tailgate to b…
How to Replace the Number Plate Bulb on a Peugeot Partner
How to Replace the Number Plate Bulb on a Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) To replace the number plate bulb on a Peugeot Partner, open the rear tailgate and loosen all the screws securing the internal panel cover. Once the s…

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the horn relay located on the Peugeot Partner? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos