Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Peugeot 307?

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cabin air filter

Video tutorial

To replace the cabin filter on the Peugeot 307, open the bonnet to access the engine bay. The filter is located at the top of the engine bay, immediately under the windscreen on the passenger side. Using a flathead screwdriver, remove the plastic rivets securing the fabric cover of the filter.

Once the cover is removed, pull off the lid to access the cabin filter. This should be removed from its housing and can be replaced.

Finally, close it again with the lid and seal the fabric cover.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Peugeot 307
How to replace the cabin air filter of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In the following guide addressed to those of you who own a Peugeot 307, we will help you complete the replacement of the cabin air filter quickly and…
How to Replace the Cabin Filter in a Peugeot 307?
How to Replace the Cabin Filter in a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In this tutorial, you will see how to replace the cabin filter in a Peugeot 307, a very simple and quick operation. First, open the bonnet, then deta…
How to Replace the Cabin Pollen Filter on a Peugeot 307
How to Replace the Cabin Pollen Filter on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How do you replace the cabin pollen filter on a Peugeot 307? Follow these steps: Use a screwdriver to remove the screws from the fabric cover located…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos