Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the service indicator for the next maintenance

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Service warning light

Video tutorial

The reset operation is not difficult; it just requires a bit of attention. To reset the mileage indicator on the onboard computer to anticipate the next maintenance service, perform the following steps.

Turn the ignition key to the off position. Locate the button on the right side of the instrument cluster, press and hold it, then turn the ignition key to switch on the instrument panel.

At this point, release the button. Turn off the panel, wait a few seconds, and turn it back on to verify that the reset has been successful.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Peugeot 406?
How to reset the service light on the Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial we can see how to reset the service in the Peugeot 406, an extremely simple and quick operation, to be carried out only once all sch…
How to Reset the Service Light on a Peugeot 406
How to Reset the Service Light on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Today, we will discover the steps and instructions that allow us to reset the service light for regular maintenance on the Peugeot 406. First, get in…
How to Reset the Service Light on the Peugeot 406
How to Reset the Service Light on the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Discover the guide and information that will allow you to reset the service warning on the Peugeot 406 in simple steps. First, get in the vehicle and…

Other guides you may be interested in

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos