Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Dome Light Bulbs on Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Interior dome light bulb

In this video, you will see how to disassemble and replace the interior lights of the dome light on a Peugeot 307. First, get inside the car and remove the dome light by prying at the sides with something thin; then disconnect the electrical connector of the bulbs to completely remove the dome light. At this point, remove the plastic from the dome light and extract the old bulb-type bulbs, as shown in the video; replace them with new ones of the correct type, and insert them properly. All that's left is to reassemble everything!

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulb in the Ceiling Light of a Peugeot 307
How to Replace the Bulb in the Ceiling Light of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let's see how to replace the flat bulb in the ceiling light of a Peugeot 207: use a screwdriver to pry between the ceiling light and the headlining p…
Removing the Interior Light on a Peugeot 307
Removing the Interior Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Are the bulbs in the interior light damaged? Here’s how to replace them. Use a screwdriver to pry between the lens of the interior light and the ligh…
Replacing the Interior Light in a Peugeot 307
Replacing the Interior Light in a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) As usual, before any maintenance operation on a car, position your Peugeot 307 on a ramp or flat surface to work safely and stably. Next, using a sma…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos