Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Heating Radiator of the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Heater core

See other generations:
This video is currently unavailable

Follow this guide for the main instructions to remove and replace the heating radiator of the Peugeot 308's cabin. First, get inside the vehicle and start removing the plastic panels located at the bottom, under the glove compartment; you will find the heating radiator matrix on the sides, as shown in the video.

Next, drain the radiator fluid by unscrewing the screws and disconnecting the pipes to remove it from the cabin; then replace it with the new one and reassemble everything!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to replace the cabin heating radiator of the Peugeot 308
How to replace the cabin heating radiator of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) The heating radiator of the Peugeot 308 is located inside the cabin, specifically behind the panel located in the driver's side footwell. To replace …
How to Replace the Cabin Heater Radiator on Peugeot 308 MK1
How to Replace the Cabin Heater Radiator on Peugeot 308 MK1
Peugeot 308 (2007-2014 / T7, MK 1) Today we will look at the main steps to remove and replace the cabin heater radiator on a first-generation Peugeot 308. First, locate the radiator, w…
How to Replace the Heating Radiator in the Peugeot 308?
How to Replace the Heating Radiator in the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the heating radiator in the Peugeot 308, remove the panel located on the side of the passenger footwell, near the centre console. Once the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos