Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlamp Bulb on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Headlight bulb

If you notice that a front headlamp bulb on your vehicle is not working, it needs to be replaced. Follow these simple instructions: First, open the bonnet and locate the headlamp unit where the blown bulb is situated. Reach behind the headlamp unit and find the clip that needs to be pushed and released. At this point, you will be able to extract the bulb. Take the new bulb, being careful not to touch the glass with your fingers, position it in the headlamp housing, and then reattach the locking clip.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Peugeot 308?
How to Replace the Front Headlight Bulb of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the front headlight bulb of the Peugeot 308, open the bonnet to access the inside of the front headlight. Once you have access, remove the…
How to replace the front headlight bulb of the Peugeot 308
How to replace the front headlight bulb of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Below are the steps that will show us how to disassemble and replace the headlight bulb of the Peugeot 308, following the instructions below. First, …
How to replace the front headlight bulb of the Peugeot 308
How to replace the front headlight bulb of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Replacing the left front headlight bulb of the Peugeot 308 is a simple and quick operation, which can be done independently thanks to our video tutor…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos