Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Peugeot 308, open the tailgate and detach the carpet covering the rear light area. Under this carpet, you will find the internal fixing screw for the light, which needs to be removed to extract the light from its housing.

After disconnecting the connector, you can remove the bulb from the light unit and replace it with a new one. Once the replacement is done, insert the new bulb back into the light, securing and reconnecting the light properly.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Bulbs in the Rear Light of a Peugeot 308
How to Replace the Bulbs in the Rear Light of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to replace the bulbs in the rear light of a Peugeot 308? This is a very simple operation, here's how to proceed: Open the boot, then remove the f…
How to Replace the Rear Headlight Bulbs on a Peugeot 308
How to Replace the Rear Headlight Bulbs on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Are the rear lights on your Peugeot 308 SW not working? This video shows how to replace the damaged bulbs. Open the boot lid, and using a screwdriver…
How to Replace the Rear Bulb on a Peugeot 308
How to Replace the Rear Bulb on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To replace the bulb in the rear headlight, you will need to remove the headlight itself, but this is a very simple operation; once the rear hatch is …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos