Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to change the front bulbs in the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Light bulb
Operation: How to change the front bulbs in the Peugeot 206?

The front bulbs can be replaced by accessing the front hood which must therefore be opened before starting any operation. We locate the headlight cover and open it by pushing the tab and turning it backwards. We now have free access to the bulbs. To extract them we must simultaneously push and pull to the right the tab that serves to keep fixed the bulb we have chosen to replace, then disconnect the connector and remove the bulb. We assemble the new one and repeat the operation with the others. Finally, let's close it all by doing the reverse process.


Posted on 12 November 2022 by ScegliAuto

    Frequently Asked Questions

    • 206 1998-2012 - What type of lamps does the Peugeot 206 fit? Read Answer
    • 206 1998-2012 - Where is the low beam fuse located on Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos