Do it yourself
| ||||
|
Peugeot 307 - Video tutorial
Model: Peugeot 307
MK 1
- Years 2001-2009 In today's video we will see the main steps to be able to remove and replace the entire clutch unit on the Peugeot 307 first series, with a 1.6 petrol engine. First of all we lift the car and start by removing the front wheels; after which we remove both wheel arches, removing the clips. At this point we proceed with draining the engine oil, then moving on to the disassembly of the front axle shaft, as shown in the video. Now let's disassemble our starter motor, unscrewing the screws and disconnecting the connector; let's move to the engine compartment to remove the battery. We unscrew all the screws of the gearbox to access the clutch, following the video to the end for replacement!
Posted on 31 May 2024 by ScegliAuto
Removing the Peugeot 307 HDi clutch
Peugeot 307 (2001-2009 / MK 1) In today's video tutorial we will see the main steps to be able to remove the clutch on a Peugeot 307 HDi. First of all, we open the bonnet and disco
Guide to replacing the cabin fan of the Peugeot 307.
Peugeot 307 (2001-2009 / MK 1) In this guide, we will see the main instructions useful for disassembling and replacing the cabin fan of the Peugeot 307. As a first step, we get on
Where is the fuse box on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In the following mini-guide we will give you all the necessary information so that you can easily find the fuse box installed inside your Peugeot 307 Other guides that may interest you
|
Frequently Asked QuestionsHow do you open the fuel flap of the Volkswagen Golf 5?In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.070
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |