Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gear Lever on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Transmission

To replace the gear lever on a Peugeot 206, you need to remove the clips at the base of the gear gaiter, which can then be lifted to access the components underneath. At the base of the lever, you will find the screws that connect it to the internal mechanisms of the gearbox: by unscrewing these screws, you can completely remove the old lever and fit the new one. Once it is secured to the gearbox, insert and secure the gaiter that was removed earlier with the appropriate clips.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) To replace the gear knob on a Peugeot 206, remove the old knob from the gear lever by simply pulling it off. Next, ensure that the black spacer insid…
Peugeot 206 (1998-2012 / MK 1) To replace the gear knob on a Peugeot 206, detach the clips at the base of the leather cover of the gear lever so that it can be fully lifted. Once t…
Peugeot 206 (1998-2012 / MK 1) In order to replace the gearbox oil of the Peugeot 206, you need to loosen the drain plug of the oil pan of the gearbox: this will obviously be locat…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos