Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gearbox oil of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Transmission fluid

In order to replace the gearbox oil of the Peugeot 206, you need to loosen the drain plug of the oil pan of the gearbox: this will obviously be located on the bottom of the vehicle, near the left driveshaft. Once the plug is unscrewed, you can drain all the old oil into a properly positioned container: this will allow you to proceed with refilling. The oil should be poured through the same vent, adding the necessary amount with the help of a funnel and a tube that should pass through the top of the engine compartment.

Posted on 11 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gearbox Oil in a Peugeot 206?
How to Replace the Gearbox Oil in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the gearbox oil in a Peugeot 206, first, unscrew the drain plug from the oil reservoir. Once the plug is removed, collect all the used oil…
How to Change the Gear Oil on a Peugeot 206
How to Change the Gear Oil on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video tutorial, see how to change the gear oil on a Peugeot 206 1.4 HDi. Lift the bonnet and secure it with the prop rod. Remove the air duct…
How to Change the Gearbox Oil in the Peugeot 206?
How to Change the Gearbox Oil in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this tutorial, you will see how to change the gearbox oil in the Peugeot 206, a simple operation that requires good manual skills. First, lift the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos