Do it yourself
| ||||
|
Peugeot 206 - Video tutorial
Model: Peugeot 206
MK 1
- Years 1998-2012 In this video tutorial we can see how to replace the gearbox oil on Peugeot 206 1.4 Hdi. Lift the bonnet and secure it with the special rod. Remove the air duct and locate the gear oil cap. Jack up the car with a hydraulic jack and put jack stands to keep the car from falling. Place a container under the gearbox to collect the used oil, unscrew the oil drain plug with an 8 mm square wrench, and wait for all the oil to drain into the pan, lower the car to facilitate oil leakage. Once all the oil has flowed out, screw the cap with the new gasket, tightening just enough. Top up the new oil with additive (SAE 75w-80).
Posted on 16 June 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |