Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Timing belt

To replace the timing belt of the Peugeot 206, first loosen the bolts securing the front right wheel. This will allow you to remove the wheel and the corresponding wheel arch cover, giving access to the tensioner pulley at the rear. By loosening its nut, the tension on the belt will be reduced, allowing it to be extracted from the top of the engine bay. At this point, you can fit a new replacement part, remount the wheel arch cover, and secure the corresponding wheel with bolts.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Timing Belt Replacement on Peugeot 206
Timing Belt Replacement on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the timing belt on the Peugeot 206 if it needs changing. Changing the timing belt is very important to avoid damaging the engine. Here’s how t…
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) Next, we will discover the steps that will allow you to disassemble and replace the timing belt on the Peugeot 206 1.4 HDi. First, lift the vehicle a…
How do you replace the timing belt of the Peugeot 206?
How do you replace the timing belt of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the timing belt of the Peugeot 206, you need to lift the car with a jack, removing the right front wheel and the corresponding inner wheel…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos