Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

As we can see in this tutorial, removing the door panel on a Peugeot 206 is an extremely simple and quick operation. First, unscrew the two indicated Torx screws, then remove the internal cover of the mirror and unscrew the screw located underneath it. Proceed with the screw located inside the grab handle and disengage the frame of the opening handle, using a flat-head screwdriver. Once this is done, grasp the panel from the bottom and begin to disengage it from the door. Follow the reverse procedure to install any replacement.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
Peugeot 206 (1998-2012 / MK 1) Before you start, open the door of your Peugeot 206. Begin by prising off and removing the internal handle trim. Next, unscrew and remove all the scr…
Peugeot 206 (1998-2012 / MK 1) Replacing the door panel on a Peugeot 206? Here’s how to remove the panel from the vehicle. Use a screwdriver to remove the screws located in the han…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos