Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Mileage of the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Warning light – error code

In this short and simple guide, you will learn how to reset the service mileage for the oil change maintenance of the first series Peugeot 2008. First, get inside the vehicle and press and hold the button found on the instrument panel; then turn the key to position one and wait for the countdown that appears on the instrument display to finish, as shown in the video. Finally, start the engine to see the new mileage before the next service!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 2008 (2013-2019 / MK 1) If the service warning light illuminates on the instrument cluster, it means that, due to mileage or time elapsed, it's time for a service. After per…
Peugeot 2008 (2013-2019 / MK 1) How do you turn off the service light on a Peugeot 2008? Follow these steps to switch off the car's light. Turn on the instrument panel and check the…
Peugeot 2008 (2013-2019 / MK 1) Let's see how to reset the maintenance light on a Peugeot 2008. Enter the vehicle and turn on the ignition, locate the light that needs resetting, an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos