Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking the Coolant Level

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Antifreeze coolant

Video tutorial

It is recommended to perform this check when the engine is cold, as you will need to open the cap of the coolant reservoir (when the engine is hot, the cooling system is under pressure, and opening the cap could cause hot liquid to escape). Once the cap is opened, check if the coolant reaches the designated mark on the reservoir indicating the reference level: add coolant until the mark is reached and close the cap. If the liquid is nearly at the level, you can also simply add water (preferably distilled); otherwise, obtain ready-to-use antifreeze liquid (if concentrated, follow the dilution instructions).


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Brake System Bleeding Instructions
Brake System Bleeding Instructions
Peugeot 106 (1991-2004 / MK 1) If the brake pedal goes soft under foot pressure and braking is ineffective, it is likely that an air bubble has formed in the system: you can bleed …
Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…
Instructions for Replacing Engine Oil
Instructions for Replacing Engine Oil
Peugeot 106 (1991-2004 / MK 1) To replace the engine oil, place the vehicle on suitable car ramps, position a container of appropriate capacity under the oil sump, aligned with the…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos