Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake System Bleeding Instructions

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Checks and maintenance

Video tutorial

If the brake pedal goes soft under foot pressure and braking is ineffective, it is likely that an air bubble has formed in the system: you can bleed the system using the bleed valves located on the brake calipers. First, ensure that there is enough fluid in the reservoir, locate the bleed valve on the brake caliper, remove any cap, and insert a tube connected to a bottle to collect the fluid; while holding the brake pedal down, loosen the valve to let the air escape; repeat this process on all four calipers and restore the fluid level in the reservoir.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacement of Brake Master Cylinder
Replacement of Brake Master Cylinder
Peugeot 106 (1991-2004 / MK 1) The brake master cylinder is fixed to the brake booster (a device that uses vacuum to reduce the force required on the pedal) and houses the reservoi…
How to Remove the Front Brake Caliper
How to Remove the Front Brake Caliper
Peugeot 106 (1991-2004 / MK 1) The following video illustrates in a few brief and concise steps how to remove the front brake caliper of a car. In the images, you can see that the …
How to Change the Front Brake Pads on Peugeot 106
How to Change the Front Brake Pads on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Changing the brake pads on the Peugeot 106? Let’s look at the disassembly of the rear brake pads. Lift the car with a jack to the desired height, rem…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos