Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Maintenance Light

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Service warning light

The operation to reset the SERVICE message related to the maintenance interval is manual and is performed using the trip reset button located at the bottom right of the instrument panel: with the ignition off, press and hold the button, turn on the ignition and wait for the 10-second countdown to start on the central display; at the end of the countdown, the value zero will appear, at this point turn off the ignition; when you turn the ignition back on, the new mileage interval until the next maintenance will appear for 5 seconds.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The procedure to reset the service light on a Peugeot 206 is simple and quick. To reset the service light, insert the key into the ignition without t…
How to reset the service light on a Peugeot 206.
How to reset the service light on a Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) Resetting the service light on a Peugeot 206 is a simple and quick operation that can be done independently. The reset is a procedure to be performed…
How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This video tutorial shows how to reset the maintenance light on a Peugeot 206. To perform this procedure, insert the key without turning it, then pre…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos