Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions to Reset the Service Light

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Service warning light

Resetting the service warning light on the instrument cluster is done manually and does not require diagnostic equipment. After performing regular maintenance with the oil and filter replacement, proceed to reset the light that appears with the flashing spanner symbol and the remaining mileage until the scheduled maintenance mileage is reached. With the ignition off, press and hold the trip reset button located at the bottom right of the instrument cluster, and while holding it down, turn on the ignition: a countdown will be displayed, at the end of which release the button and turn off the ignition.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Resetting the SERVICE Light
Instructions for Resetting the SERVICE Light
Peugeot 206 (1998-2012 / MK 1) If the SERVICE warning light is illuminated on the instrument cluster, it means it is time for maintenance; after replacing the engine oil and the co…
Resetting Service Maintenance Light
Resetting Service Maintenance Light
Peugeot 206 (1998-2012 / MK 1) The operation to reset the SERVICE message related to the maintenance interval is manual and is performed using the trip reset button located at the …
Resetting the Service Light on a Peugeot 206
Resetting the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) When it's time to change the engine oil in a Peugeot 206, a warning appears on the instrument panel to remind you. After completing the necessary tas…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos