Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Resetting the SERVICE Light

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

Video tutorial

If the SERVICE warning light is illuminated on the instrument cluster, it means it is time for maintenance; after replacing the engine oil and the corresponding filter (consider replacing the air and fuel filters as well and take the opportunity during the oil change to check the brakes, coolant, etc.), proceed to reset the SERVICE light: this is a manual operation that does not require any diagnostic tools.

With the ignition off, press and hold the trip reset button, then turn on the ignition.

A countdown of 10 seconds will start on the display; at the end of this countdown, turn off the ignition to complete the reset. The next time you turn on the ignition, the mileage interval for the next maintenance will appear.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot 206
How to Reset the Service Light on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The service light on the Peugeot 206 activates when maintenance is due, such as a service. After this, it is necessary to reset the light. To reset t…
Instructions to Reset the Service Light
Instructions to Reset the Service Light
Peugeot 206 (1998-2012 / MK 1) Resetting the service warning light on the instrument cluster is done manually and does not require diagnostic equipment. After performing regular ma…
Replacing the Cabin Light Bulb in the Peugeot 206
Replacing the Cabin Light Bulb in the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Follow these instructions to remove and replace the cabin light bulb in the Peugeot 206. First, get inside the cabin and carefully pry off the plasti…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos