Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil and Oil Filter of a Peugeot 206 1.1

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Engine oil

Video tutorial

Today, we will discover the procedure that will allow us to perform the routine maintenance service by replacing the engine oil and oil filter of a Peugeot 206 1.1. First, raise the vehicle and begin by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then open the bonnet and unscrew the oil filter cartridge using a socket spanner with an extension, as shown in the video.

At this point, install the new oil filter cartridge and top up with new engine oil, pouring the correct amount.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

Oil Filter Replacement on a Peugeot 206
Oil Filter Replacement on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the oil filter on a Peugeot 206? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench to uns…
How to Replace the Oil Filter on the Peugeot 206
How to Replace the Oil Filter on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today, you will learn the steps to replace the engine oil and oil filter. The first step is to open the front bonnet and remove the oil filler cap wh…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Peugeot 206 (1998-2012 / MK 1) Before lifting the vehicle to access the oil sump, open the bonnet, unscrew the filler cap, and remove the dipstick to facilitate oil drainage; then …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos