Do it yourself
| ||||
|
Peugeot 207 - Video tutorial
Model: Peugeot 207
MK 1
- Years 2006-2015 As for the replacement of the clutch for a Peugeot 207 it is necessary to work under the car. Then lie down under the car or jack up the passenger side. You have to find the gearbox near the engine, in the direction of the engine, look for the hose that connects the brake fluid reservoir, it must end directly in the master cylinder, there you will find the slave cylinder of the clutch. Remove the dust cap from the breather screw also with a screwdriver, insert the pipe and the clamp on the connection of the breather valves, now visible, fill the reservoir with brake fluid and hook the other end of the flexible pipe. Open the valve with a socket wrench and observe the pipe and the reservoir, when there is no more bubble in the brake fluid coming out of the pipe, now you can close the valve, repeat until there is no more bubble. Temporarily close the valve, release the clutch and check the brake fluid level in the reservoir. If it is less, fill it up to the maximum. Remove the hose and replace the dust cap, depending on the type of cap, it can be closed more or less easily. Finally in the driving position change gear to test the hardness.
Posted on 27 August 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |