Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Clutch on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Clutch

Video tutorial

To replace the clutch on a Peugeot 207, position the vehicle on a flat surface and disconnect the battery. Safely lift the car and remove the front wheels to access the gearbox.

Next, disconnect the supports, wiring, and drive shafts connected to the gearbox, then support the engine with an appropriate stand. At this point, unscrew the gearbox bolts and separate it from the engine to reach the clutch assembly.

Remove the pressure plate and the worn clutch disc, checking the condition of the flywheel as well. Install the new clutch kit, centring the disc correctly with the appropriate tool.

Reassemble the gearbox in the reverse order, reconnect all components, and check the proper operation of the pedal and gear engagement before using the vehicle.


Posted on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch of the Peugeot 207?
How to Replace the Clutch of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the clutch of the Peugeot 207, lift the car using a jack and remove the two front wheels by unscrewing the appropriate bolts. This will al…
How to Replace the Clutch Cable on the Peugeot 207?
How to Replace the Clutch Cable on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the clutch cable on the Peugeot 207, open the bonnet to access the clutch cable from the right side of the engine block. Once the cable is…
Replacing the Clutch on a Peugeot 207 1.6
Replacing the Clutch on a Peugeot 207 1.6
Peugeot 207 (2006-2015 / MK 1) Below are the instructions that will allow you to dismantle and replace the clutch discs on a Peugeot 207 1.6. First, raise the vehicle and begin by …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos