Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch of the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Clutch

To replace the clutch of the Peugeot 207, lift the car using a jack and remove the two front wheels by unscrewing the appropriate bolts. This will allow access to the fixing screws and connectors located underneath the car that prevent the removal of the clutch. The clutch must also be freed from the connectors attached at the top, accessible from the engine bay. Once the clutch is freed, it can be removed from underneath the car and replaced with a new one.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Cable on the Peugeot 207?
How to Replace the Clutch Cable on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the clutch cable on the Peugeot 207, open the bonnet to access the clutch cable from the right side of the engine block. Once the cable is…
How to Change the Clutch on a Peugeot 207
How to Change the Clutch on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To replace the clutch on a Peugeot 207, position the vehicle on a flat surface and disconnect the battery. Safely lift the car and remove the front w…
Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos