Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in the Peugeot 5008?

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Replacing the battery in the Peugeot 5008 is an extremely simple task. First, ensure the key is not in the ignition for safety.

Start by opening the bonnet, then remove the battery cover and unscrew the indicated connector by loosening the corresponding bolt. Next, disconnect the negative terminal, remove the fuse box, and unscrew the lower right fixing bolt using a 10mm socket.

At this point, disconnect the positive terminal, remove the battery, and install the replacement by following the reverse procedure.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Peugeot 5008 (2009-2016 / MK 1) To replace the battery in the Peugeot 5008, open the bonnet to locate the device inside the engine compartment: at the top right of the compartment, …
Peugeot 5008 (2009-2016 / MK 1) How to remove the battery from a Peugeot 5008? Let's look at the removal of the battery located in the engine bay. Lift the front bonnet after unlock…
Peugeot 5008 (2017-2024 / MK 2) To replace the remote battery on a Peugeot 5008, leverage the lower part of the device: this will allow you to detach the cover on the back of the re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos