Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to remove the rear door panel in the Peugeot 307?

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Door panel
Operation: How to remove the rear door panel in the Peugeot 307?

In this tutorial we can see how to remove the rear door panel in the Peugeot 307. For this quick and easy operation we will need a Torx T20 wrench, a flat tip screwdriver and a plastic spatula. First of all, unscrew the screw located inside the support handle and the one located in the lower internal corner, then disengage the cover of the opening handle and disconnect the connector. Subsequently, we pry with the plastic spatula along the entire perimeter of the panel, until each internal clip is released and removed completely.


Posted on 14 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos