Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on a Peugeot Partner?

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: AdBlue warning light

See other generations:
Video tutorial

To reset the AdBlue warning light on a Peugeot Partner, you must first top up the tank so that the additive tank is full: once filled, ensure there are no leaks. If the warning light remains on after topping up, it is possible that there is a fault with the level sensor: therefore, it will be necessary to reset the light by connecting a diagnostic tool to the vehicle's OBD port.

This port is located at the bottom left of the steering column: following the instructions shown in the tutorial, the warning light can be completely reset.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Light in a Peugeot Partner?
How to Reset the AdBlue Light in a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) There are several methods to reset the AdBlue light on the Peugeot Partner. The first illustrated in the video consists simply of driving the vehicle…
How to Reset the AdBlue Warning Light on the Peugeot Partner?
How to Reset the AdBlue Warning Light on the Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) The latest generation diesel engine in the Peugeot Partner requires the use of AdBlue, an additive containing urea, to reduce exhaust emissions after…
How to reset the AdBlue light on a Peugeot Partner?
How to reset the AdBlue light on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To reset the AdBlue light on a Peugeot Partner, first top up the additive fluid, ensuring there is a sufficient quantity in the tank. If the light re…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos