Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : What to do when the check engine light comes on on your Peugeot Boxer

Peugeot Boxer - Video tutorial

Model: Peugeot Boxer MK 2 - Years 2006-2023
Part: Instrument cluster
Operation: What to do when the check engine light comes on on your Peugeot Boxer

The engine failure warning light does not provide information on a specific problem but can refer to various engine faults. The first thing to do is to observe the warning light because it can come on in two different ways, in fact it can remain fixed or it can flash . In the first case, the fixed light warns us that the problem exclusively concerns the functioning of the engine. In this case, it is possible to continue driving the vehicle, but avoid putting the engine under strain so as not to cause further damage and obviously go to the nearest mechanic who will then it will scan the memory of the control unit in order to identify the precise cause of the failure. If, on the contrary, the warning light is flashing, then the failure will probably be due to a catalytic converter malfunction.


Posted on 6 April 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Boxer 2006-2023 - Why is the hill holder function no longer available on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How to reset the service on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What does the maintenance light on the Peugeot Boxer 2 indicate? Read Answer
    • Boxer 2006-2023 - What does the warning light on Peugeot Boxer signal? Read Answer
    • Boxer 2006-2023 - Where to find the list of warning lights on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What do the warning lights represent in the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What are the warning lights on the Peugeot Boxer? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos