Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror Cover on the Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

Below are the instructions and methods necessary to remove and replace the rear cover of the external rear-view mirror of the vehicle. First, you need a small screwdriver and a plastic or wooden lever.

Take the lever and gently pry off the mirror. Then, from the inside, unclip the plastic cover's fixing clips and loosen them one by one until the rear cap can be removed.

Proceed to replace it with a new one, perhaps in a different colour, reattach the clips by applying pressure from the outside, and finally, refit the mirror.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) If you want to replace the external rearview mirror of your first edition Peugeot 208 by yourself, all you have to do is follow all the steps describ…
How do you replace the plastic cover of the external rearview mirror of the Peugeot 208?
How do you replace the plastic cover of the external rearview mirror of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Without a doubt, it is a very quick and practical way to replace the plastic cover or cap of the external rearview mirror of the Peugeot 208, but not…
How to replace the external rearview mirror of the 2014 Peugeot 208.
How to replace the external rearview mirror of the 2014 Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) Replacing the external rearview mirror of a 2014 Peugeot 208 in case of breakage is an extremely simple task to perform on your own. Before removing …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos