Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How do you open the hood of the Peugeot 308 Mk2?

Peugeot 308 - Video tutorial

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Door
Operation: How do you open the hood of the Peugeot 308 Mk2?

The guide shows how to open the engine compartment of the Peugeot 308 Mk2. After securing the vehicle, from the driver's compartment, pull the lever located under the dashboard. This lever allows the engine hood to be lifted from the closed position and at the same time, in this situation, the hood is still locked from full opening. Go to the front of the vehicle. In the slot that has been created, on the left of the French automaker's name, there is a small hook; pulling this element completely disengages the lock and it is possible to lift the engine hood. The closing is done by lowering the hood and giving a slight push to lock the lock.


Posted on 24 May 2023 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos