Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Peugeot 308 When the Remote Battery is Flat?

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

If the remote battery of the Peugeot 308 is flat or it does not work due to other issues, you can open the door mechanically. Press the button at the top of the remote and insert the key into the lock on the driver's door handle.

This will allow you to open the door and unlock the others from the inside. To close the doors, turn the screw on the inner side of the door, as shown in the tutorial.

The driver's door can always be closed from the lock.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to replace the battery in the remote control of the Peugeot 308.
How to replace the battery in the remote control of the Peugeot 308.
Peugeot 308 (2007-2014 / T7, MK 1) If the remote control of your first-generation Peugeot 308 is no longer working due to a completely dead battery, just read the following guide to un…
How to board the vehicle when the key of the Peugeot 308 is not detected
How to board the vehicle when the key of the Peugeot 308 is not detected
Peugeot 308 (2013-2021 / T9, MK 2) One of the main causes of not detecting the key on a Peugeot 308 car is the low battery of the key remote. In emergency situations where it is not po…
How to Replace the Remote Battery of the Peugeot 308?
How to Replace the Remote Battery of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the battery of the remote control for the Peugeot 308, use an object to pry open the cover at the bottom of the device, detaching the rear…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - How to replace the key battery in the Peugeot 308? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos