Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Peugeot

Model: Peugeot Peugeot Various
Part: Transmission

If the plastic gear knob on your vehicle is broken and you want to replace it yourself, the following description provides all the instructions and steps to follow for a correct replacement. First, purchase an aftermarket gear knob and consider replacing the gaiter as well. Then, remove the gaiter from the centre console by lifting it, and detach it from the gear knob. Take the new gear knob and insert it into the top of the leather gaiter, which you will then place onto the gear stick, securing the lower edge of the gaiter back onto the centre console.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to mount the gear knob of a Peugeot
How to mount the gear knob of a Peugeot
Peugeot Peugeot Various After removing the gear knob because it was too damaged, it is important to insert a new one inside that matches the characteristics required by the …
How to remove the gear knob of Peugeot vehicles.
How to remove the gear knob of Peugeot vehicles.
Peugeot Peugeot Various Today we will explain how to remove the gear knob from a Peugeot vehicle. To perform this simple operation, we need to rotate the knob on both sides,…
How to Replace the Gear Knob on a Peugeot/Citroen with the Spurtar Knob
How to Replace the Gear Knob on a Peugeot/Citroen with the Spurtar Knob
Peugeot Peugeot Various In this video, we look at a gear knob compatible with Peugeot, Citroen, and Toyota: compatibility depends on the type of fitting, which must be threa…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos