Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Dashboard of the Peugeot 308 MK2

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Car stereo

In this video, you will see how to remove the dashboard of the Peugeot 308 MK2. You will need plastic spatulas to avoid scratching the parts, as they are only clips. Start from the lower part of the dashboard on the driver's side. Under the steering wheel, you will find two star screws to remove in order to take off the under-steering cover. Now remove the base of the gear lever gaiter, again prying from below. This will reveal two screws at the base of the central console controls that you need to unscrew. Continue by removing the two vents above the radio, again prying, this time from above. This will expose two screws that will allow you to remove the screen: the simplest method is to cover it with a cloth and gently pull towards you. Disconnect all electrical connections. To remove the lower control section, you will need a special key, which you can find on eBay with the code 313021540749 for £15.45, allowing you to release the block by pressing on the clip, as demonstrated by our YouTuber. Then, simply remove the plastic trim, disconnect the electrical connectors, and take out the Smeg by removing the last two screws.

Updated on 31 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) In this video we can see how to disassemble the dashboard of the Peugeot 308 MK2; we will need long stem screwdrivers, and we must apply pressure on …
Peugeot 308 (2013-2021 / T9, MK 2) We observe how to disassemble the external rearview mirror in the Peugeot 308 in this helpful video tutorial. The reasons for carrying out this inter…
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…

Other guides you may be interested in

How to open the fuel tank door in the Hyundai I20?

In this tutorial we can see how to open the fuel tank door in the Hyundai I20, a very simple operation similar to the typical procedure of many vehicles. First of all, let's go inside the cabin, it is not necessary to insert the key or unlock all the locks, then we locate and operate the lever located in the lower left area of the cabin, right next to the driver's seat. Once we have done this, we exit the vehicle, open the door completely and unscrew the fuel tank cap. To close the door, simply press it gently until you hear a click.

Watch the video!


by ScegliAuto

More videos