Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on the Peugeot 308 T9

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Instrument cluster

In today's tutorial, you will learn how to remove the instrument cluster from the dashboard of the Peugeot 308 T9, second series, by following these simple steps. First, get inside the vehicle; the instrument cluster is secured within the dashboard without any screws or fastening system: therefore, simply pull it out using tools, prying and pulling it towards you, as shown in the video. Once removed from the dashboard, disconnect the electrical connector located at the back; apply the reverse procedure for reassembly!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Cabin Fan from the Peugeot 308
Guide to Removing the Cabin Fan from the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Below are the instructions that will allow you to remove and replace the cabin fan in the Peugeot 308. First, get inside the vehicle and begin disass…
Removing the Instrument Cluster from a Peugeot 308
Removing the Instrument Cluster from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) In today's tutorial, learn how to remove the instrument cluster from a first-generation Peugeot 308. First, disconnect the two battery terminals; the…
How to reset the maintenance light on the Peugeot 308 2021
How to reset the maintenance light on the Peugeot 308 2021
Peugeot 308 (2021-2026 / P5, MK 3) In this new mini guide, we will help you complete the procedure correctly to manually reset the maintenance light on the display of the instrument pa…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos