Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Diesel Filter on a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

Video tutorial

To replace the diesel filter on a Peugeot 307, lift the bonnet, remove the engine cover by pulling it while being careful of the clips; using a flat screwdriver, disconnect the connector, disconnect the fuel inlet hose (put a cap on it to prevent fuel spillage), also disconnect the fuel outlet hose (put a cap on it to prevent fuel spillage); using a ratchet and a 27 mm socket, unscrew the diesel filter cover, remove it (placing a container underneath to catch any diesel and the filter), take out the old filter and remove the old seal.

Take a pump (manual or electric), suck the diesel into the filter container and dry the container; take the new filter with the new seal, place the new seal in place of the old one using a flat screwdriver, insert the new diesel filter onto the cover and reposition it onto the container; now you can reconnect the fuel outlet and inlet hoses (removing the caps), reconnect the connector and give a few pumps of diesel to fill the filter container.

Finally, you can start the car engine (if it doesn't start immediately, allow the filter to fill further).


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Peugeot 307 (2001-2009 / MK 1) Do you want to replace the fuel filter on a Peugeot 307? In this video, learn how to remove the diesel filter. First, lift the bonnet and secure it. …
Peugeot 307 (2001-2009 / MK 1) The fuel filter on the Peugeot 307 is neither the screw-in metal type nor the immersion type; it is essentially a plastic block that integrates the f…
Peugeot 307 (2001-2009 / MK 1) In this tutorial, you will see how to replace the fuel filter in the Peugeot 307, a very simple operation. First, open the bonnet, then remove the en…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos