Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Peugeot 508?

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

Video tutorial

As we can see in this tutorial, replacing the headlight bulbs in a Peugeot 206 is a very simple and economical operation. Before proceeding, ensure that the key is not inserted for safety.

Start by opening the bonnet, then locate the large plastic cap at the back of the headlight in question and open it by unlocking the relevant clip. Next, disconnect the power connector of the bulb to be replaced, unclip the metal clip, and remove it from the housing.

Finally, insert the replacement bulb, avoiding touching the glass with bare hands, and reassemble everything.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

Removing Front Headlight Bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the front headlight bulbs on a Peugeot 206? Let's look at removing the bulbs and parts of the front headlight. Open the bonnet by …
Replacing Headlight Bulbs on a Peugeot 206
Replacing Headlight Bulbs on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Need to change the damaged headlight bulbs on a Peugeot 206? Here’s how to replace them. Lift the front bonnet by pulling the lever located at the bo…
Replacing the Headlight Bulb on a Peugeot 206
Replacing the Headlight Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s see how to replace the front headlight bulbs on a Peugeot 206. Lift the bonnet by pulling the lever located at the bottom right of the dashboar…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos