Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter on the Peugeot 308, start by removing the plastic cover on the left side of the passenger footwell. First, unclip a clip, then carefully pull off the plastic cover, taking care not to break the clips that hold it in place.

Remove the filter cover and take out the filters one at a time. Once the two filters are removed, take the new filters, insert the upper filter first, pushing it into position, and then insert the lower one. Close the filter cover, refit the plastic cover ensuring it clips back into place, and reinsert the clip.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on Peugeot 308
How to Replace the Pollen Filter on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you replace the pollen filter on a Peugeot 308? Follow this guide to disassemble: Use a lever to remove the plastic cover under the front wind…
How to replace the cabin air filter of the Peugeot 308
How to replace the cabin air filter of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today we will explain how to replace the cabin air filter of the Peugeot 308 model 2, produced from 2013 to 2021 on your own. The cost of the cabin a…
How to Replace the Cabin Air Filter on the Peugeot 308 II
How to Replace the Cabin Air Filter on the Peugeot 308 II
Peugeot 308 (2013-2021 / T9, MK 2) Today, you will learn how to independently replace the cabin air filter on the Peugeot 308 model 2. The cabin air filter is located under the glove c…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos