Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Headlight Bulb on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight bulb

Today, you will see, thanks to this useful tutorial, the procedure necessary to change the dipped beam bulb on your Peugeot 207. This operation is very simple to carry out, and with a little manual dexterity, you can do it entirely on your own. Let's get started by opening the engine bay of the vehicle, then remove the rubber dust cover at the back of the headlamp. Once done, disconnect the bulb connector and move the retaining tab by pressing it and sliding it to the right. Now you can remove the old bulb and replace it with a new one by following the reverse procedure.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 207 (2006-2015 / MK 1) Replacing the front headlight bulb on a Peugeot 207 is a very simple and quick task to do yourself. For the replacement, you will need an H7 bulb. Op…
Peugeot 207 (2006-2015 / MK 1) The replacement of the front bulb on the Peugeot 207 car follows simple steps. We start by opening the front hood and immediately remove the cap of t…
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos