Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : How to adjust the time on the Peugeot Expert van?

Peugeot Expert - Video tutorial

Model: Peugeot Expert Mark3, MK 3 - Years 2016-2024
Part: Checks and maintenance
Operation: How to adjust the time on the Peugeot Expert van?

In this tutorial, we can see how to adjust the time in the Peugeot Expert van, an extremely simple and quick operation to be carried out after changing the time or after replacing the battery. First of all, insert the key and turn on the instrument panel, then press the button depicting a gear, located to the right of the touch-screen display, and go to the "Time/Date" section. Then move to the "Hour" tab, select the time, and adjust it according to your needs. Finally, also set the various formats, if necessary, and save the setting by returning to the main screen.


Posted on 5 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Expert 2016-2024 - Why did the AdBlue warning light come on in the Peugeot Expert van? Read Answer
    • Expert 2016-2024 - In the past, probable problems with the engine of the Peugeot Expert have been highlighted? Read Answer
    • Expert 2008-2016 - How do you set the time on the Peugeot Expert? Read Answer
    • Expert 2016-2024 - How do you reset the adblue light in the Peugeot Expert? Read Answer
    • Expert 2016-2024 - What happens if the pressure sensor on the Peugeot Expert breaks? Read Answer
    • Expert 2016-2024 - What does the AdBlue warning light on the Peugeot Expert indicate? Read Answer
    • Expert 2008-2016 - How to reset the "Service" warning light on a Peugeot Expert? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos