Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light in the Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part:

In this tutorial, you can see how to reset the tyre warning light in the Peugeot 3008, a very simple and quick operation, to be performed only after restoring the correct pressure in each tyre according to the instructions in the manual. First, insert the key and turn on the instrument panel, then enter the general menu by pressing the appropriate button on the console. Next, navigate to the "Driving" section, enter "Under-inflation initialisation" and confirm the calibration. Restart the vehicle to check that the operation has been successful.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Peugeot 3008?
How to Reset the Tyre Pressure Light on a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) In this tutorial, you will see how to reset the tyre pressure light on a Peugeot 3008, a very simple and quick operation to perform only after restor…
How do you reset the tire pressure warning light on the Peugeot 3008?
How do you reset the tire pressure warning light on the Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) The tire pressure sensor of the Peugeot 3008 can be reset by inflating the tires until they reach the recommended pressure values: these values will …
How to Reset the Tyre Pressure Warning Light on the Peugeot 3008
How to Reset the Tyre Pressure Warning Light on the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) To reset the tyre pressure warning light on the Peugeot 3008, turn on the ignition so you can then press the button located in the centre of the dash…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos