Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Peugeot 308

Model: Peugeot 308 P5, MK 3 - Years 2021-2026
Part: Cabin air filter

To ensure that the ventilation system of the Peugeot 308 circulates the cleanest air possible, a specific filter has been installed on the intake that must be replaced at the scheduled intervals. To do this, sit in the passenger seat, detach the end of the centre tunnel, remove the panel under the glove compartment, pull out the tube that supplies air to the compartment, and open the cover of the filter box. Remove the filter in two parts, clean the box with a blast of compressed air, insert the two parts of the new filter, refit the cover and the air tube, secure the panel under the glove compartment, remove the pressure pin from the tunnel panel, secure the panel and lock it with the pin.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Peugeot 308
How to replace the cabin air filter of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today we will explain how to replace the cabin air filter of the Peugeot 308 model 2, produced from 2013 to 2021 on your own. The cost of the cabin a…
How to replace the cabin filter on the Peugeot 308 2018
How to replace the cabin filter on the Peugeot 308 2018
Peugeot 308 (2013-2021 / T9, MK 2) If you need a guide to help you complete the replacement of the cabin air filter on your 2018 Peugeot 308, just read the following instructions caref…
How to replace the cabin filter in the Peugeot 308
How to replace the cabin filter in the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To easily and independently replace the cabin air filter in your Peugeot 308 first series (2007-2014), follow the steps in this mini guide. First, en…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos