Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to replace the headlight bulb of the Peugeot 307.

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Headlight bulb
Operation: How to replace the headlight bulb of the Peugeot 307.

The steps to replace the left front headlight bulb of the Peugeot 307 are as follows: - open the front hood; - remove the light fixture by rotating it counterclockwise; - lift the protective tabs - disconnect the internal connector to remove the bulb; - insert the new bulb and connect the connector - close the light fixture. Finally, close the hood and test the bulb to ensure proper functioning. Proceed in the same way for the right headlight bulb if necessary. If the bulb works but the headlight does not, check the condition of the fuse.


Posted on 12 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 307 2001-2009 - Where is the Peugeot 307 low beam fuse located? Read Answer
    • 307 2001-2009 - What bulbs are in the Peugeot 307 headlight? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos