Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How do you replace the gear selector cables of the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Gearbox
Operation: How do you replace the gear selector cables of the Peugeot 206?

In order to replace the gear selector cables of the Peugeot 206, you need to open the hood so that you have access to the components located inside the engine compartment: on the right side, you will be able to locate the battery, which can be removed from its housing by loosening the fixing screws. Underneath it, you will be able to locate the gear selector cables, which can be removed from their housing by unscrewing the fixing screws; the new cables can then be inserted, securing them in place with the appropriate screws and verifying that everything works.


Posted on 13 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 206 1998-2012 - How many liters of oil are needed for the manual gearbox of the Peugeot 206? Read Answer
    • 206 1998-2012 - What are the most common gearbox problems in a Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos