Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

Video tutorial

To reset the service light on the Peugeot 207, first press the button located on the right side of the instrument cluster. Then, hold the button until the countdown finishes, release the button, and turn off the instrument cluster.

Restart the vehicle by turning off the instrument cluster and turning it back on. Finally, check that the mileage for the next service is correctly entered. The steps above are the same for all Peugeot vehicle types.

If the light does not turn off, visit a workshop for a diagnostic check.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to reset the oil warning light on the Peugeot 207
How to reset the oil warning light on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) The oil light on indicates that it is necessary to perform an oil change and only after that reset the light. To perform this operation on Peugeot 20…
How to Reset the Service Light on the Peugeot 207
How to Reset the Service Light on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) On Peugeot 207 vehicles, as well as on Peugeot 206 vehicles, it is possible to reset the service light related to the car service in a few simple and…
How to reset the oil light on the Peugeot 207
How to reset the oil light on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) If you have just changed the engine oil and the related filter on your Peugeot 207, but the warning light continues to stay on the instrument panel, …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos