Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Door trim panel

Open the door and equip yourself with plastic levers to avoid damaging the door trims. Use a lever to remove the silver cover of the armrest, then lift the control panel for the windows and disconnect the connectors. Now remove the screw located in the small recess on the armrest. Start removing the screws around the panel, and use a lever to detach the edge of the handle. Check if your model has a light on the lower part of the door; if so, you will need to remove it with the plastic lever and disconnect the connector. Finally, remove the panel, taking care to disconnect any connectors.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…
How to remove the door panel of a Peugeot 308?
How to remove the door panel of a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the door panel of your Peugeot 308, start by taking a trim removal tool or a flat screwdriver wrapped in a cloth to avoid scratches, and un…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos