Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on the 208

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

This video shows the procedure to reset the tyre pressure on the Peugeot 208. This procedure is very simple and quick. To reset the tyre pressure, start the instrument cluster without starting the engine, then press the menu button next to the central display.

Once the menu is open, select the vehicle option, then select the tyre pressure option, and confirm the reset. The car will automatically perform a pressure reading with the reset.

If the warning light continues to illuminate even after this procedure, with the tyres at the correct pressure, it indicates a fault with the sensor.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to reset the TPMS warning light on the Peugeot 208
How to reset the TPMS warning light on the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) When the TPMS light remains on on the instrument panel of your second generation Peugeot 208 even in the absence of a puncture and with all tires inf…
How to store the tyre pressure on the Peugeot 208 2015?
Peugeot 208 (2012-2019 / MK 1, A9) When replacing the tyres on a car, or if the vehicle's ECU has undergone a reset or data loss, it may be necessary to set the inflation pressure of t…
How to Reset the Multimedia System of a Peugeot 208
How to Reset the Multimedia System of a Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) Today, we will go through the instructions that will allow you to perform a general reset on the control unit and multimedia system of the Peugeot 20…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos