Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : How to reset the service of the Peugeot Partner B9

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Instrument cluster
Operation: How to reset the service of the Peugeot Partner B9

In this video we can see how to reset the service of the Peugeot Partner B9: Make sure to have closed the driver's door and to have the ignition turned off. Then press and hold the button for resetting the partial odometer, which is located at the base of the display. Turn on the ignition and a countdown will start from ten. When "0" appears on the display, you can release the button for the partial odometer: the service reset will have been completed. At this point, you can turn off the ignition and if you want to immediately check, turn it back on to see if the indicator light is off.


Posted on 20 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - What does the warning light with the triangle on the Renault Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does an orange triangular warning light in Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does the warning light with the orange triangle on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - When does the AdBlue warning light on Peugeot Partner Tepee warn? Read Answer
    • Partner Tepee 2008-2018 - What does the orange triangle light on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does the urea warning light on the Peugeot Partner mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos