Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse for the particulate filter of the Peugeot Boxer located?

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Fuse box

The fuse related to the injection of the particulate filter of the Peugeot Boxer is located inside the fuse box of the engine compartment, under the left front headlight. To replace the fuse, it is necessary to open the hood and then remove the headlight by unscrewing the screws; then we can unscrew the screws on the cover of the box and remove the white 25 Ampere fuse, located at the bottom left. Once removed, insert a new 25 Ampere fuse and close the fuse box, reposition the headlight and start the vehicle to check that everything is in order.

Posted on 26 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses in the Peugeot Boxer
Where to Find the Fuses in the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) In the Peugeot Boxer, the fuse box in the cabin is located at the bottom of the dashboard on the left side of the steering wheel for left-hand drive …
Where is the Peugeot Boxer's glove box located?
Where is the Peugeot Boxer's glove box located?
Peugeot Boxer (2006-2024 / MK 2) The Peugeot Boxer produced from 2002 to 2009 contains four fuse boxes. To know the exact location of the fuses, we must refer to the label placed on …
Where are the fuses located in the Peugeot Boxer?
Where are the fuses located in the Peugeot Boxer?
Peugeot Boxer (1993-2006 / MK 1) Each fuse in the Peugeot Boxer is located inside one of the dedicated fuse boxes present in the vehicle: in this type of vehicle, you can find two bo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos