Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Warning Light in a Peugeot Partner Van?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, see how to reset the tyre warning light in a Peugeot Partner van, a very simple and quick operation, to be performed only after restoring the correct pressure in each tyre as per the instructions in the manual. Start by entering the cabin, then turn on the ignition and press the "MENU" button on the central console.

Next, navigate to "Personalisation-Configuration", "Define the vehicle parameters", "Driving assistance", and finally "Tyre pressures". Once you confirm the reset, you can restart the vehicle and check that the operation was successful.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Peugeot Partner Tepee (2008-2018 / B9) .. In this tutorial, you will learn how to reset the tyre warning light in a Peugeot Partner van, a very simple and quick operation. Before.. …
Peugeot Partner Tepee (2018-2026 / MK 3) As shown in this tutorial, resetting the tyre warning light on the Peugeot Partner van is a very simple and quick operation. Before proceeding, ensur…
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will see how to reset the tyre pressure light in a Peugeot Partner Tepee van, an extremely simple and quick operation, to be pe…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos