Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clock Display Bulbs on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Clock

If the central display on the dashboard no longer shows the time and date, a backlight bulb (T5 fitting) may have failed. To replace it, start by detaching the frame around the display that houses the hazard light button. Once the frame is detached, disconnect the power connector for the button and continue by unscrewing the fixing screws of the display to remove it from its housing, disconnecting the relevant connector. At this point, you can extract the bulb holders by twisting them and replace all three bulbs, not just the blown one. Proceed in reverse for reassembly.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Dashboard-Central Console Bulbs on Peugeot 206
Replacing Dashboard-Central Console Bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, you will see how to remove and replace the lights of the dashboard or central display on a Peugeot 206, following these simple steps. …
Replacing the Display Bulb on the Peugeot 206
Replacing the Display Bulb on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If you find that the bulbs in the display at the centre of the dashboard of the Peugeot 206 have blown, replace them as soon as possible. Release the…
How to Replace the Display Bulb in a Peugeot 206
How to Replace the Display Bulb in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide, you will learn how to replace the display bulbs in a Peugeot 206. First, turn off the ignition. Next, take a flathead screwdriver and …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos